Product series SMC..WUniversal application at high alternating and shock loads in radial and axial directions. Suitable for large swings. Vmax = 60 m/min.
Product specification ..WAll series of rod ends and spherical bearings, except thesealed ..2 RS design, can be fitted with threaded bolts and used as angle joints. The bolt is pressed and riveted into the inner ring.
Material: Stainless steel, material 1.4305, hexagon bare.
Other materials such as 1.7225 browned. Special dimensions on request.
Series SMCOuter part: Up to size 14 free-cutting steel 1.0718, from size 16 material 1.0501 galvanized and chromalized to DIN 50961.
Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59, 2.0550.31.
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished.
Series SMXC (high-strength)Available from size 5
Outer part: Material 1.7225 tempered or similar, galvanized and chromalized to DIN 50961.
Bushings: As for SMC..
Inner ring: As for SMC..
Series SMRC (rustproof)Available from size 3
Outer part: Stainless steel 1.4305, from size 16 forged.
Bushings: as for SMC..
Inner ring: as for SMC.. but hard-chromed, if required stainless steel.
Bearing slacknessDepending on size between 0.01 and 0.09 mm radially. With reduced or increased slackness
- Hard-chromed inner ring: Order designation SMC xx IH
- Stainless inner ring: Order designation SMC xx IR
- Hard-chromed outer part and inner ring: Order designation SMC xx H