Maintenance free heavy-duty rod ends AND Threaded bolts - DIN/ISO 12240-4

Productseries SFCP..W

Universal application at high constant loads and low alternating and shock loads in axial and radial directions. For difficult lubrication conditions, high running speeds and large swings. Vmax = 60 m/min.

Product specification ..W

All series of rod ends and spherical bearings, except thesealed ..2 RS design, can be fitted with threaded bolts and used as angle joints. The bolt is pressed and riveted into the inner ring.

Material: Stainless steel, material 1.4305, hexagon bare.
Other materials such as 1.7225 browned. Special dimensions on request.

Tabelle zu Gelenkköpfe: Serie SFCP mit Gewindebolzen

Series SFCP

Friction pairing: Steel/PTFE bronze fabric.
Outers part: Up to size 14 free-cutting steel 1.0718, from size 16 material 1.0501, galvanized and chromalized to DIN 50961.
Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59, galvanized, lined with permanently affixed sliding foil, consisting of PTFE with a bronze supporting fabric.
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished.

Series SFXCP (high-strength)

Available from size 5
Friction pairing: siehe SFCP
Outer part: Material 1.7225 tempered or similar, galvanized and chromalized to DIN 50961.
Bushings: As for SFCP..
Inner ring: As for SFCP..

Series SFRCP (rustproof)

Available from size 3
Friction pairing: siehe SFCP
Outer part: Stainless steel 1.4305, from size 16 forged.
Bushings: As for SFCP.., if required stainless steel.
Inner ring: As for SFCP.. but hard-chromed; if required stainless steel

Bearing slackness:

Depending on size, between 0.002 and 0.020 mm radially.

Tabelle zu Gelenkköpfe: Serie SFCP

DRAWING

 SFCP W Alpha SFCP W


DESIGN

  • Stainless inner ring:
    Order designation: SFCP xx IH
  • Hard-chromed inner ring: Werkstoff 1.4034
    Order designation: SFCP xx IR
  • Hard-chromed outer part and inner ring:
    Order designation: SFCP xx H

Sealed design:

Sizes 8–30 can be supplied with replace­ able sealing sleeves
Serie SFCP: Sealed design
Specification sealing (..2RS)

threaded bolts For ROD ENDS

All series of rod ends and spherical bearings, except the sealed ..2 RS design, can be fitted with threaded bolts and used as angle joints. The bolt is pressed and riveted into the inner ring.
erie SFCP: threaded bolts
Specification threaded bolts (..W)