Relubricatable heavy-duty design, rod ends With Thread - CETOP Norm

Universal application at high alternating and shock loads in radial and axial directions. Suitable for large swings. Vmax = 60 m/min.

Common features

Friction pairing: Steel/PTFE bronze fabric
female thread: DIN13-6H, right or left (left thread: SFLCP..CETOP)

Series SFCP..CETOP

Outer part: Up to size 14 free-cutting steel 1.0718, from size 16 material 1.0501, galvanized and chromalized to DIN 50961.
Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59, galvanized, lined with permanently affixed sliding foil, consisting of PTFE with a bronze supporting fabric.
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished.

Series SFXCP..CETOP (high-strength)

Available from size 5
Outer part: Material 1.7225 tempered or similar, galvanized and chromalized to DIN 50961.
Bushings: As for SFCP..
Inner ring: As for SFCP..

Series SFRCP..CETOP (rustproof)

Available from size 3
Outer part: Stainless steel 1.4305, from size 16 forged.
Lagerschalen: As for SFCP (if required stainless steel.)
Inner ring: hard-chromed; if required stainless steel

Bearing slackness:

Depending on size, between 0,005 and 0,020 mm radially.

Tabelle Produktdetails Gelenkköpfe Serie SFCP CETOP

DRAWING

SFCP_DRW

DESIGN

  • Stainless inner ring:
    Order designation: SFCP xx IH CETOP
  • Hard-chromed inner ring:
    Order designation: SFCP xx IR CETOP
  • Hard-chromed outer part and inner ring:
    Order designation: SFCP xx H CETOP

Sealed design:

Sizes 8–30 can be supplied with replace­ able sealing sleeves
Specification Abdichtung (..2RS)

threaded bolts For ROD ENDS

All series of rod ends and spherical bearings can be fitted with threaded bolts and used as angle joints.
Specification Gewindebolzen (..W)