relubricatable ROD ENDS with female thread AND Threaded bolts - DIN/ISO 12240-4

ProduCt serieS SFC..W

Universal application at high alternating and shock loads in radial and axial directions. Suitable for large swings. Vmax = 60 m/min.

Product specification ..W

All series of rod ends and spherical bearings, except thesealed ..2 RS design, can be fitted with threaded bolts and used as angle joints. The bolt is pressed and riveted into the inner ring.

Material: Stainless steel, material 1.4305, hexagon bare.
Other materials such as 1.7225 browned. Special dimensions on request.

Tabelle zu Gelenkköpfe: Serie SFC mit Gewindebolzen

SerieS SFC..

Friction pairing: Steel on heavy-duty bronze
Outer part up to size 14: free-cutting steel 1.0718
Outer part up to size 16: material 1.0501, galvanized and chromalized t DIN 50961
Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59, 2.0550.31
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished

series SFXC.. (high-strength)

available from size 5
Friction pairing: Steel on heavy-duty bronze
Outer part: Material 1.7225 tempered or similar, galva­nized and chromalized to DIN 50961.
Bushings: As for SFC..
Inner ring: As for SFC..

Serie SFRC.. (rustproof)

available from size 3
Outer part: Stainless steel 1.4305, from size 16, forged.
Bushings: As for SFC..
Inner ring: As for SFC.. but hard-chromed; if required stainless steel.

Bearing slackness

Depending on size between 0.01 and 0.09 mm radially. With reduced or increased slackness

Tabelle zu Gelenkköpfe: Serie SFC

DRAWING

Gelenkkopf SFC..W

Design

  • Stainless inner ring: Order designation SFC xx IH
  • Hard-chromed inner ring: Order designation SFC xx IR
  • Hard-chromed outer part and inner ring: Order designation SFC xx H

Sealed design:

Sizes 8–30 can be supplied with replace­ able sealing sleeves
Series SFC: Sealed design
Specification sealing (..2RS)

threaded bolts For ROD ENDS

Sämtliche Gelenkköpfe können mit Gewindebolzen ausgerüstet und als Winkelgelenk eingesetzt werden.
Series SFC: threaded bolts
Specification threaded bolts (..W)