relubricatable ROD ENDS with female thread  DIN/ISO 12240-4

series SFC.., SFXC.., SFRC..

Universal application at high alternating and shock loads in radial and axial directions. Suitable for large swings. Vmax = 60 m/min.


Common features

Friction pairing: Steel on heavy-duty bronze
Female thread: DIN13-6H, right oder left (left thread: SFLC..)
Lubricating nipple: Size 5 - 50 funnel-type DIN3405, form D

series SFC..

Outer part up to size 14: free-cutting steel 1.0718
Outer part up to size 16: material 1.0501, galvanized and chromalized t DIN 50961
Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59, 2.0550.31
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished

series SFXC.. (high-strength)

available from size 5
Outer part: Material 1.7225 tempered or similar, galva­nized and chromalized to DIN 50961.
Bushings: As for SFC..
Inner ring: As for SFC..

series SFRC.. (rustproof)

available from size 3
Outer part: Stainless steel 1.4305, from size 16, forged.
Bushings: As for SFC..
Inner ring: As for SFC.. but hard-chromed; if required stainless steel.

Bearing slackness


Depending on size between 0.01 and 0.09 mm radially. With reduced or increased slackness

Tabelle Produktdetails Gelenkköpfe Serie SFC

DRAWING

SFC_DRW

Design

  • Stainless inner ring: Order designatio: SFC xx IH
  • Hard-chromed inner ring: Order designation: SFC xx IR
  • Hard-chromed outer part and inner ring: Order designation: SFC xx H


Sealed design:

Sizes 8–30 can be supplied with replace­ able sealing sleeves
Series SFC: Sealed design
Specification sealing (..2RS)

threaded bolts For ROD ENDS

All series of rod ends and spherical bearings, except the sealed ..2 RS design, can be fitted with threaded bolts and used as angle joints. The bolt is pressed and riveted into the inner ring.
Series SFC: threaded bolts
Specification threaded bolts (..W)