Control Systems for Rotary Indexing Tables and Rotating and Indexing Spindles

Ide­ally, ro­tary in­dex­ing ta­bles are con­trolled by the ma­chine con­trol sys­tem, which has fol­low­ing ad­van­tages:
  • In­te­grated pro­gram­ming con­trol sys­tem
  • In­ter­po­lated po­si­tion­ing (turn while burn)
If in­te­gra­tion to the ma­chine con­trol is not pos­si­ble (no free axis), the ro­tary in­dex­ing table can be con­trolled by the HIRSCHMANN con­trol sys­tem H1625 which com­mu­ni­cates with ma­chine con­trol via a par­al­lel in­ter­face (M-code). NC pro­gram for the ro­tary in­dex­ing table is pro­grammed in the H1625 con­trol sys­tem. Con­tin­u­ous path con­trol, (turn while burn) is not pos­si­ble.

Po­si­tion­ing Con­trol Sys­tem H1625 for Ro­tary In­dex­ing Ta­bles and Ro­tat­ing or In­dex­ing Spin­dles

  • Mem­ory ca­pac­ity is 99 NC pro­grams with 999 pro­gram­ma­ble lines in each
  • Par­al­lel in­ter­face for ma­chine con­trol (M-Code)
  • Se­r­ial in­ter­face for trans­mis­sion of NC pro­gram

Type

Op­er­at­ing Volt­age

Di­men­sions [Wx­LxH]

Ap­pli­ca­tions

h1625 H1625.xxx 230V 50/60Hz 540x420x230mm Ro­tary In­dex­ing Ta­bles, Ro­tat­ing or In­dex­ing Spin­dles
H1625.AC3.1 230V 50/60Hz 320x420x230mm H42R.MRS


Speed Con­trol H1680 for Ro­tat­ing Spin­dles H80R.MACxxx

  • start/stop con­trolled by ma­chine (M-Code)
  • speed reg­u­la­tion range 0 - 1500 min -1
H1680_AC4_2

Type

Op­er­at­ing Volt­age

Di­men­sions [WxLxH]

Ap­pli­ca­tions

H1680.AC4.2 230V 50/60Hz 320x360x230mm H80R.MACxxx