Manual clamper for the precise positioning of the M-, P- and 3D-pallets on the "B" beams. This clamper incorporates HIRSCHMANN's well-known centering noses or Vee blocks and Z-support system.
The manual clamper is provided with a securing latch for collision-free positioning of the pallets with aligned workpieces.
This clamper, or several clampers, are fixed with three screws to the basic "B" beam, at any position in steps of 25 mm (1").
| Perm.
workpiece weight with workpiece holder: |
35kg (77lbs) |
| Positioning/repetitive accuracy: | < 0.002 mm (.00008") |
H 4000
M-Clamper (manual)
Manual clamper as H4300, but for mounting to the machine table. Front
surface is ground for axis alignment.
The securing latch is equipped with two positioning pins for an easier
manual positioning of the pallet.
| Perm.
workpiece weight with workpiece holder: |
35kg (77lbs) |
| Positioning/repetitive accuracy: | < 0.002 mm (.00008") |
Pneumatic clamper with central power clamping for the automatic or manual positioning of the H4105 Pallets and H4110 3D-Pallets. The pneumatic clamper is provided with a securing latch for collision-free manual positioning of the pallets with aligned workpieces.
This clamper is necessary for automatic workpiece change with the EROBOT Workpiece Changer.
| Perm.
workpiece weight with workpiece holder: |
35kg (77lbs) |
| Positioning/repetitive accuracy: | < 0.002 mm (.00008") |
| necessary pneumatic pressure: | 6 bar |
3 m of synthetic hose FESTO PUN 6x1 mm are included in the delivery.
Manual control unit (pneumatic valve) for the activation of functions (opening, clamping, cleaning) of the Pneumatic Clamper H4100.