|
The hardened basic beams, which are fastened to the machine's base with screws, are used for the infinitely guiding and positioning of the cross beams. The Solid Jaws H 4320 are positioned in steps of 25 mm (1 ") and serve as a base for the Clamper H4300 and the Adapter H4380 for the Multiholder of the Fixturing System 2000. Beam lengths are available in steps of 50 mm (2"). The length and the hole pattern of the fastening screws are matched to the machine model in question.
H
4320 Adjustable End Stop Positioning/repetitive accuracy < 0.002 mm (0.00008"). |
|
|
Q
42.. Cross Beam The infinitely movable cross beam can be clamped in any position between two Basic Beams B40 ... Larger workpieces up to 150 kg (330 lbs) can be clamped between the cross beams using the Support Plates H4366. To avoid collision of the lower wire nozzle with the support plates, the cross beam can be lifted or lowered by using spacer plates having a thickness of 6 mm (0.24"). Cross beams having a length of more than 600 mm (24") are delivered with a larger cross-section (36 x 85 mm (1.41 " x 3.34") instead of 30 x 60 mm (1.18" x 2.36")), to avoid deflection of the beam because of the large length. QD
42.. Cross Beam Q
42 KLI Insulating and Clamping Element |
