H 4300 111311 Beam Clamper

Pallet System 4000 - Basic Holder / Basic Holder Accessories

	H 4233 Basic Holder The Basic Holder is the small version of the cross beam. This holder is placed with a pallet directly on the clamper. The Beam Vise Kit H4312, H4312.1 or a Clamping Beam H4331 can be fixed to the face, for example. The presetting of the workpiece should be done on a granite surface plate. Max. workpiece size of parallel workpieces max. workpiece depth 130 mm (5.12") max. workpiece weight 30 kg (66.15 lbs) Weight of the Basic Holder 6 kg (13 lbs)

	Beam Vise Kit consisting of: H 4312 Solid Jaw, H 4312.1 Clamper For collision-free clamping of parallel workpieces directly on the basic Holder H4233. The presetting of the workpiece should be done on a granite surface plate. Max. workpiece weight of parallel workpieces with a max. depth of 130 mm (5.1") 30 kg (66.15 lbs)

	H 4331 Clamping Beam For collision-free clamping of rectangular workpieces and, supplemented by the set of Vee block, also for the collision-free clamping of cylindrical workpieces, directly on the Basic Holder H4233. If a Uniholder H4231 is provided, the clamping beam is not required, as these parts are already contained in the uniholder. Max. permissible workpiece weight 8 kg (17.64 lbs) H 4332 Set of Vee Blocks (2 pcs.) For clamping cylindrical workpieces with the Clamping Beam H4331. The preliminary setting of the workpiece should be done on the granite surface plate.

H 4315 Support Holders (3 pcs.)
The support holders are attached to the cross beams or the Basic Holder H4233 and are mainly for clamping thin, round and rectangular workpieces.

For heavy workpieces it is recommendable to sustain the support holders with the Support Plates H4366.

The clamping range can be extended by replacing the clamping screw with other lengths in Clamping Jaw Set H2860.

Maximum load 30 kg (66 lbs)


	H 4366 Support Plate Support plates are attached to the cross beams and are used for clamping large workpieces between two cross beams. The support surface, protruding the cross beams, is variable from 8 mm (0.31") to 29 mm (1.14"). Clamping of the workpieces is done with the clamping jaws of the Clamping Jaw Set H2850. Maximum load per plate 50 kg (110 lbs)

	H 2850 Clamping Jaw Set The clamping jaw set consists of clamping jaws, supports, bolts M6 20-40 mm (0.8-1.6") long, set screws M6 and also open-end M6 and internal hexagon wrenches. This clamping set is required when larger workpieces are placed between the cross beams on the support plates H4366 and clamped there. Delivery in plastic box.